flatcam

Open full view…

G-Code Output

palinjenesis
Wed, 23 May 2018 11:39:45 GMT

Would it upset things if you altered the G-Code output so that there was a space before the "Y" Value? Current output looks like: G00 X2.6666Y8.8804 G01 X2.6665Y19.0569 Could it be changed to : G00 X2.6666 Y8.8804 G01 X2.6665 Y19.0569 with a space between each value. I like your program verry much. It's not a big problem for me, I just edit the output at the moment with a text editor with: replace "Y" with " Y". My machine is a self made 2D plotter using an Arduino. (My code requires a space between values)

Marius Stanciu
Mon, 28 May 2018 02:02:12 GMT

Something like this is satisfactory? G21 G90 G94 G01 F300.00 G00 Z3.0000 M03 S9000 G4 P1 G00 X18.7768 Y14.8020 G01 F300.00 G01 Z-0.0700 G01 F300.00 G01 X18.7587 Y14.8217 G01 X18.7053 Y14.8702 G01 X18.6473 Y14.9131 G01 X18.5855 Y14.9502 G01 X18.5203 Y14.9811 Unfortunately, due of the forum formatting (which I find really limiting) the spaces can't be seen very well. I modified the 'default' postprocessor file to make this formatting. I will post another Nightly in short time with this modification (among other things).

palinjenesis
Fri, 01 Jun 2018 17:39:18 GMT

Yes it looks like there is a space there. (a space in front of the Y) As you say, is hard to see on the forum. Thankyou, this will make things a lot easyer for me.