well...a really great work you made. Thanks for your help.
hi Marius, I have a board with 3 different hole sizes and in the Excellon object I try to generate a job for each size but when I select one and then push the Mills Drill Geo I get this message "Please select one or more tools from the list and try again". I only can generate drill for all the holes.
You need to pay attention on how you do the selection. You need to do it in the first column. If you just click somewhere on the line it's not enough. Seethe following GIF file. At some point I try to illustrate the error, how not do it.
https://gifyu.com/image/9sbS
thanks. cool gif
File "/home/gaston/FlatCAM/FlatCAMApp.py", line 2843, in new_object return_value = initialize(obj, self) File "/home/gaston/FlatCAM/FlatCAMObj.py", line 4380, in job_init_multi_geometry tool_no=tool_cnt) File "/home/gaston/FlatCAM/camlib.py", line 5692, in generate_from_multitool_geometry pt, geo = storage.nearest(current_pt) File "/home/gaston/FlatCAM/camlib.py", line 7721, in nearest tidx = super(FlatCAMRTreeStorage, self).nearest(pt) File "/home/gaston/FlatCAM/camlib.py", line 7662, in nearest return next(self.rti.nearest(pt, objects=True)) StopIteration
That means nothing Gaston, without the context.
Im following this tutorial https://www.instructables.com/id/DIY-Professional-Double-Sided-PCB/ It uses solder mask and then include the solder mask gerber to clear the pads in the pcb. If I use negative values (as state in the tutorial) the program close and says "report bug". Gastón
Gaston, You talk in general, you are vague. You need to provide exact data, useful data. The best thing is to post the Gerber file (if you want to protect your data, you can export a partial Gerber file, just with the area of interest). Then you write down all the steps you've done so I can reproduce the error. Have a look here: https://gifyu.com/image/9sMs
Sorry, copy paste make this error. How do I upload a file?
thanks, my mistake.
Use this site: https://nofile.io or others like this. Or a MEGA / Dropbox /Sync etc account and post the link here.
Marius maybe I'm abusing of your time and I find really instructive your GIF, is possible to show me the steps to make 2 side pcb? here is the link for 2 side pcb im testing. Thanks for your patient and help. https://mega.nz/#!paxGxQwC!r1_f5iBmXemMNkpsOeuPiyBAneJ9NWiJ-tGzWatEO6g Regards Gastón
by the way when I try to open the toplayer using file-->open-->gerber this error is displayed: [ERROR]Gerber Parser ERROR. Gerber Line #13733 Gerber Line Content: M02* KeyError('solid_geometry'): thanks again for your help. Gaston
The one if the files posted above? Ok, I've seen it. I'll look on it.
thanks again for your patient and help.
Problem fixed.
Do I need to download an upgrade?
When I will finish the current mods for FlatCAM I will post a new build, 8.915.
ok, thanks. Let me know. Regards Gaston