flatcam

Open full view…

Icons at the top

kowo
Sat, 17 Jan 2015 16:19:35 GMT

I can see no icon at the top (Ubuntu 14.04) Can anybody help me? Is any dependency missing? greetings from Vienna

jpcaram
Sun, 18 Jan 2015 23:32:33 GMT

No icon on the toolbar? What version of FlatCAM are you using? Or did you download the source? JP

kowo
Mon, 19 Jan 2015 09:51:59 GMT

Hi! Thank you for the answer. I'm using version 8.1 installed from https://bitbucket.org/jpcgt/flatcam/downloads/FlatCAM-8.1.zip under Ubuntu 14.04, and i have no toolbar at all. There is only an empty space. Same with v.8.0. For test I've installed it under Win XP and there is all OK. It's a GREAT PROGRAMM! Thanks for your work. Greetings from Vienna PS. What about inserting a space between X and Y coordinats? I'm using Repetier-Host and -firmware?

kowo
Mon, 19 Jan 2015 09:56:37 GMT

I have installed it with "sudo sh setup_ubuntu.sh". No errors, no warnings.

kowo
Mon, 19 Jan 2015 10:37:38 GMT

Just now I've installed version 7 and left at the top I can see the toolbar.

jpcaram
Mon, 19 Jan 2015 16:12:56 GMT

Can you check in the folder for FlatCAM 8.1 what is in the `share/` folder? There should be about 80 `.png` images. If those are missing I blieve the toolbar won't show them and not give an error. JP

jpcaram
Mon, 19 Jan 2015 17:43:03 GMT

Hi Kowo, I tried a clean installation of Ubuntu 14.04 and FlatCAM 8.1 and it works fine. See screenshot. [Ubuntu 14](//muut.com/u/flatcam/s2/:flatcam:7usd:ubuntu14.png.jpg) I would like to help but I need more information. Can you send a screenshot and post what is printed in the terminal? JP

kowo
Mon, 19 Jan 2015 18:44:19 GMT

Hi all! I've got the toolbar. It was my mistake :( I must start it from inside of its directory, not from outside of it. I wrote a little start script which is in my path and all works fine. Thank you for the suggestions, but it was "MEA CULPA" Greetings to all from Vienna.

jpcaram
Mon, 19 Jan 2015 18:46:39 GMT

No so much your fault. I would call this a bug. In fact, I will create an bug issue to ensure the program changes into its own directory at sturtup such that all relative paths remain valid. I'm glad it's working for you now. Thanks, JP

jpcaram
Mon, 19 Jan 2015 18:52:56 GMT

Your input is welcome here: https://bitbucket.org/jpcgt/flatcam/issue/101/relative-paths-are-broken-if-flatcam-not