ikalogic

Open full view…

Device does not work out of the box with W10 EDU 20H2

rs21
Mon, 31 May 2021 09:12:27 GMT

I've just installed the latest software. The device shows up in device manager as "ScanaQuad SQ100" and is marked with a nasty exclamation mark. Something is not right there. Please have a look at this.

Ibrahim KAMAL
Mon, 31 May 2021 09:44:35 GMT

Hi, Did you try installing this driver: https://www.ikalogic.com/sq-logic-analyzer-pattern-generator/drivers/ Or, on some systems, you may also need this one: https://ftdichip.com/drivers/d2xx-drivers/ Please let me know if this works.

rs21
Mon, 31 May 2021 09:46:00 GMT

Installed on openSUSE Tumbleweed. The devie shows up as /dev/ttyUSB0. In the software no device is listed.

rs21
Mon, 31 May 2021 09:54:13 GMT

Installing the 1st driver package didn't do anything. It claimed "ready to use", but windows still isn't happy.

rs21
Mon, 31 May 2021 09:54:41 GMT

The driver "CDM21236_Setup.exe" from FTDI did something. I will do further testing.

rs21
Mon, 31 May 2021 10:36:33 GMT

The SQ100 is now usable in Scanastudio, but does not show up in device manager anymore. Is this normal?

Ibrahim KAMAL
Mon, 31 May 2021 10:52:22 GMT

Good news! It's almost certainly still showing in device manager, but maybe not at the same place, and probably under a collapsed tree item. Anyway, if it's showing in ScanaStudio, then everything should be fine, happy debugging :)

rs21
Mon, 31 May 2021 13:38:10 GMT

That's fine for the day job, yes. At home I'm bound to linux, so I'll open another thread for that some time later. Thanks for the quick reply.